1. Make sure that the tape is fully rewound to the start.
2. Hold down the SHIFT key and press the RUN/STOP key and
the words LOAD and PRESS PLAY ON TAPE will appear.
3. Start the cassette machine and in a few seconds the display will show that
the program is loading.
4. When it is fully loaded, the program will run by itself.
Loading problems are rare with the Commodore 64. If they do occur, it is
usually because the recorder heads are dirty. Clean them regularly with tape
head cleaning fluid. Keep the deck well away from the television as hum pick-up
can also cause mis-read of data.